<div>I have just finished replaceing my cutlass bearing. I had no
problems thanks primarly to all of the help provided by you all.
I just wanted to say thanks for the help. Dick K., mine was like your - the bearing had no set screws. It
took a little time to cut out but no real problem. In the "for what it's worth department". To remove the coupling
from the shaft I used 4 pieces of threaded rod with a deep well
socket placed between the shaft and the coupling on the engine as
a "puller". It came off fairly easy but was time consuming.Thanks again for all your advise.Vic Copelan
</div>
problems thanks primarly to all of the help provided by you all.
I just wanted to say thanks for the help. Dick K., mine was like your - the bearing had no set screws. It
took a little time to cut out but no real problem. In the "for what it's worth department". To remove the coupling
from the shaft I used 4 pieces of threaded rod with a deep well
socket placed between the shaft and the coupling on the engine as
a "puller". It came off fairly easy but was time consuming.Thanks again for all your advise.Vic Copelan
</div>