I’ve been slowly working on this in the background while doing other projects.
I made them out of teak with tongue & groove joints. Also epoxied and screwed for reinforcement. I also replaced the little hasp which could have been popped open with a screwdriver. The new one is a beefy German stainless steel thing that would need to be hit with a grinder to break it. The screws on the hinges are Torq Security screws which need a special bit to unscrew.
I'm just finishing the Cetol that the rest of the wood is slathered with
Jim Ball & others had posted photos of doors they constructed - thanks for the inspiration!
You can lift the hinges out and remove the doors really easily.
In case anyone is considering this, here are the stainless hinges I used:
https://www.amazon.com/gp/product/B07HWY1699/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
Here is the stainless hasp I used:
https://www.amazon.com/gp/product/B004C47L8E/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Here are the security screws for the hinges:
https://www.amazon.com/gp/product/B00SFZ0P3Y/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Last edited: