382 standing rigging wanted

Discussion in 'How To Use This Site (FAQs)' started by namwah, Nov 30, 2017.

  1. namwah

    namwah New Member

    Joined:
    Apr 1, 2017
    Messages:
    11
    Home Port:
    Little Harbour Abaco Bahamas
    Hi I have a 1980 382 hull # 220 Dragon . Im Looking for some standing rigging and turnbuckles mine is original . Also where can find the measurements for the shrouds , turnbuckles and pins ? Id like to get some that someone changed out for preventive reasons or are parting out their boat . Happy to pay for it and shipping Thanks Gary
     
  2. wild382

    wild382 John

    Joined:
    Oct 31, 2009
    Messages:
    1,207
    Home Port:
    Lake Champlain
    We have hull 219 made just before yours. Let me know what you find out on the standing rigging. Thanks
     
  3. namwah

    namwah New Member

    Joined:
    Apr 1, 2017
    Messages:
    11
    Home Port:
    Little Harbour Abaco Bahamas
    Hi John I didn't find out anything about the standing rigging it seems like all the 382s would be rigged the same Im still looking for a used set of rigging and the measurements of the rig . Did you have any luck ? Gary
     
  4. wild382

    wild382 John

    Joined:
    Oct 31, 2009
    Messages:
    1,207
    Home Port:
    Lake Champlain
    Maybe post a request on the used equip section asking there. I’m not much of an expert on rigging. Most professional riggers should have access to the measurements but each boat reall6 should be measured on these older boats.
    Let me know what you find out.
     

Share This Page