Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Welcome to this website/forum for people interested in the Morgan 38 Sailboat. Many of our members are 'owners' of Morgan 38s, but you don't need to be an owner to Register/Join.
GREAT TO SEE THE HOMEPAGE UP AND RUNNING! THANKS TO ALL INVOLVED. I JUST RETURNED FROM ZIHUATANEJO, MEXICO VISITING
THE CRUISING GROUP FROM THE WEST COAST AND IT WAS GREAT; WE
CAN'T WAIT TO RETURN OUR 382 BACK TO MEXICO.
JIM & JUNE IN ALAMEDA
1. Move the existing motor forward 4" 2. Modify companion way stirs. 3. install 6-Vetus "Mitsuen" hydraulic motor mounts. 4. Cut propshaft 5. Install bulkhed behind transmission. 6. Install "Aqua drive" (A thrust bearing and 2-CV joints) 7. Dont worry about mis-alignment, you can have up to 16-degrees!. The results are outstanding, and it can be done in the water! Now if the Yanmar 3qm30 weighed just a little less we would really have something. Engine and tranmission are about 598#'s, about the same as a small block Chevy.
1. Move the existing motor forward 4" 2. Modify companion way stirs. 3. install 6-Vetus "Mitsuen" hydraulic motor mounts. 4. Cut propshaft 5. Install bulkhed behind transmission. 6. Install "Aqua drive" (A thrust bearing and 2-CV joints) 7. Dont worry about mis-alignment, you can have up to 16-degrees!. The results are outstanding, and it can be done in the water! Now if the Yanmar 3QM30 weighed just a little less we would really have something. Engine and tranmission are about 598#'s, about the same as a small block Chevy.
1. Move the existing motor forward 4" 2. Modify companion way stairs. 3. install 6-Vetus "Mitsuen" hydraulic motor mounts. 4. Cut propshaft 5. Install bulkhed behind transmission. 6. Install "Aqua drive" (A thrust bearing and 2-CV joints) 7. Dont worry about mis-alignment, you can have up to 16-degrees!. The results are outstanding, and it can be done in the water! Now if the Yanmar 3QM30 weighed just a little less we would really have something. Engine and tranmission are about 598#'s, about the same as a small block Chevy.
<div>I do a 75 kW, 440V, 3 phase, 60Hz motor operating with a frequency inveter in a crane, for hoist.
When I put the nominal load in the crane, the motor vibrate between 49 to 53 Hz.
Would this problem be solved just changing inveter parameters.
Do you have experience on this?
</div>
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.