captpete
Member
I have confirmed that my holding tank leaks at the top edges in two spots so bilge water gets in (and presumably full tank contents can get out although haven't used the boat enough yet to notice that...).
Having had good luck working with epoxy and 1708 biaxial in other glass repairs, it seems to me that putting some layers of 1708 glass tape around the whole top edge would be a reasonably easy repair solution.
Wondering if others have performed holding tank repairs with any success and what pitfalls they may have encountered. There are certainly many threads on this problem, just not real clear what folks did to close off the leaks. Not looking at this stage to put in a new holding tank. Thanks.
Having had good luck working with epoxy and 1708 biaxial in other glass repairs, it seems to me that putting some layers of 1708 glass tape around the whole top edge would be a reasonably easy repair solution.
Wondering if others have performed holding tank repairs with any success and what pitfalls they may have encountered. There are certainly many threads on this problem, just not real clear what folks did to close off the leaks. Not looking at this stage to put in a new holding tank. Thanks.