Why didn't I do this before?
- Thread starter john english
- Start date
Warren Holybee
Active Member
If you are ever bored and want to work on boats, I know of one.... I don't want a light in there, because that means I am working in there too often!
terry_thatcher
Terence Thatcher
John, what are the fiberglass members in there? It looks almost like a tube of some sort. Or am I misreading the photos?
john english
Member
There is a vertically mounted piece of plywood that was bonded to the hull during the Morgan retrofit.
The float switch is attached to the 1/2 in pvc pipe for easy removal
Another piece of wood on the hull is the backing plate for a rg ground (Dynaplate)
The float switch is attached to the 1/2 in pvc pipe for easy removal
Another piece of wood on the hull is the backing plate for a rg ground (Dynaplate)
Rbuchansn57
New Member
I’d like to have that dust pan.. any place where these can be purchased? I assume custom layup.
Warren Holybee
Active Member
The dust pan is original to the boat. A replacement would have to be custom.
Mitchell S Allen
Active Member
I've thought of molding some in fiberglass. I'm away right now on my way to San Diego to join the Baja HaHa.
We put into Santa Barbara early yesterday
I will be back early December and see what I can do for replacement Dust pan.
Mitchell
We put into Santa Barbara early yesterday
I will be back early December and see what I can do for replacement Dust pan.
Mitchell
Rbuchansn57
New Member
Have a great trip! I’ll check back in December!
Mitchell S Allen
Active Member
Good morning, yes we've made it to San Diego. Taking care of some minor repairs before sailing with the HaHa on the 4th.
sundog
New Member
Great work on the bilge lights, I installed these on my father in laws catamaran but haven’t gotten around to installing them on my own boat, maybe this year haha.
For the dust pan, perhaps just a 3d printed dust pan? Would be super easy and cheap to make. If you think there’s enough need for a dust pan, I’d be happy to prototype a 3d model for printing.
Mitchell, how far south are you planning to go on the haha? I’m Currently up in the northern end of the Sea of Cortez making my way south. Should be in Zihuatanejo by Christmas.
For the dust pan, perhaps just a 3d printed dust pan? Would be super easy and cheap to make. If you think there’s enough need for a dust pan, I’d be happy to prototype a 3d model for printing.
Mitchell, how far south are you planning to go on the haha? I’m Currently up in the northern end of the Sea of Cortez making my way south. Should be in Zihuatanejo by Christmas.
Mitchell S Allen
Active Member
Sundog,
We're heading all the way down the coast to Cabo San Lucas. The Rally ends on the 16th of November. I'm not sure of our plans at this point, but most likely Sail for a few days there. Explore a little and then start the bash back.
I wanted to stay for longer but it isn't happening this trip. I would love to cruise the Sea of Cortez.
Perhaps another time.
M
We're heading all the way down the coast to Cabo San Lucas. The Rally ends on the 16th of November. I'm not sure of our plans at this point, but most likely Sail for a few days there. Explore a little and then start the bash back.
I wanted to stay for longer but it isn't happening this trip. I would love to cruise the Sea of Cortez.
Perhaps another time.
M
Mitchell S Allen
Active Member
Thank you!
I hope we can do that sometime.
I hope we can do that sometime.