• Welcome to this website/forum for people interested in the Morgan 38 Sailboat. Many of our members are 'owners' of Morgan 38s, but you don't need to be an owner to Register/Join.

Perkins Impeller part number ?

Lukas Svrcek

New Member
Hi Everyone,
I searched the site but no luck. I have 4108 Perkins and need to get the impeller. The one I took out has no part# anywhere. I took it to west marine and they couldn't figure it out.
I included a picture below. If anyone has the part number for the impeller and gasket - I would be eternally great full.

Thanks in advance
 

Attachments

mpearson

Mark Pearson
Staff member
Lukas - That looks just like my old Perkins 4.108 impeller, etc. We replaced the engine with a Yanmar - it was a very sad Perkins having been abused by a previous owner. I've been meaning to put my (brand new) spare parts on this forum for sale. Let me go find them and I'll post some photos, etc. I've also got some brand new oil filters too.
According to my notes the impeller is Jabsco part #1210-0001, and I think it comes with the gasket.
 
Last edited:

mpearson

Mark Pearson
Staff member
Hi Lukas and all -
I've got Impellers for our Perkins, Kill Filter's Fuel Filters for Perkins, and RACOR fuel filters that are brand new, previously our spares.

I've posted them over the Boats and Equipment for Sale area.

 

Lukas Svrcek

New Member
Hi Lukas and all -
I've got Impellers for our Perkins, Kill Filter's Fuel Filters for Perkins, and RACOR fuel filters that are brand new, previously our spares.

I've posted them over the Boats and Equipment for Sale area.

Mark, thanks so much for the info you provided. When I took off the impeller yesterday it didnt have the grooves like yours. It has to be a different kind. I will take a picture of it while I have it off. Back to square one.
 

Cardo

New Member

Lukas Svrcek

New Member
Hi Lucas,
Your pump may be a Sherwood pump. My Perkins has a Jabsco pump, but the PO had a box of parts that included a Sherwood, which looks like yours. If you can figure out the model of the pump, WM or another marine supply shpould be able to match the impeller. Were there any markings on the cover?
You could also try this impeller identification link:
I hope this helps,
Rich
That's the only marking I could make out - sherwood.
But no numbers. Is there a place on the pump that has a model number?
 

Cardo

New Member
In the second picture there is a number, possibly the model number. The third picture is a Jabsco replacement for a Sherwood pump. This may be the same as yours. Yours looked as if it has the keyway drive?
 

Cardo

New Member
The Jabsco impeller in the picture has the Sherwood 9959 model number on the package. That Jabsco number should be good too.
If you want the impeller that I have to keep as a spare, let me know.
 

stnick

lee nicholas
I only use the Globe impellers in my water pumps , they are Blue and made of poly not rubber , so no fear of a rubber fin breaking off and jamming some place down the line . I get them from Depco pump company in Clearwater Florida
They are the same company that services the big water pumps for Disney World
These people know pumps , that's all they do .
 
Top